Nidec TNP Series User Manual

3. Parts names and functions
3.1 Main unit
TNP series Front TNJ series Front
Measuring mode display
Recall Key
Power Ke
y
Mode Key
Zero/RST Key
Comparator judgement lights
Mode Key
Zero/RST Key
Display
Power Ke
y
Mem key
Display
Power key Turn ON and OFF.
Recall key
(TNP only)
Recall data at opening and closing measuring.
At average measuring mode, data cannot be recalled.
Available at function mode.
Mem key
(TNP only)
Memory peak hold value at opening and closing measuring.
At average measuring mode, data cannot be memorized.
Available at clear of all memory data.
Available at function mode.
Mode key Switch the measuring mode.
At memory calling, press this button in order to go back to measuring mode.
Available at function mode.
Zero/RST key At Average measuring mode - Zero set.
At open and close measuring mode - Peak reset
Available at start-up of function mode.
Available at function mode.
Display Shows measuring data, units of measure, battery status, function status.
Measuring mode
LED light
LED on “Open”, “Mean” or “Close” indicates measuring mode status.
Comparator
judgement display
(TNP only)
After the comparator judgement, one LED at the “Hi, Go, Lo” display is on. This indicates
the result of comparator judgement.
Average measuring mode. Performs a comparator judgement of measuring data, then
displays the result.
Opening or Closing measuring mode. Performs a comparator judgement of peak hold
value, then show the result.
When comparator judgement is fail, Hi or Go or Lo does not turn on.

Nidec TNP Series Specifications

General

Brand	Nidec
Model	TNP Series
Category	Measuring Instruments
Language	English