50 SI-Ethernet User Guide
Issue: 3
The number of available receive cyclic links.
The number of available transmit / receive process images for fieldbus protocols such as Ethernet/
IP.
The number of available mappings in the system for use in cyclic links.
The background task cycles per second represents the number of times per second the
background task is currently executing. The background task is responsible for cyclic data
exchange with the drive. With more cyclic data mapped the cycle rate of the task will decrease.
Current resource available for the synchronous task.
S.09.002 Cyclic Rx Links Free
Minimum 0 Maximum 255
Default None Units None
Type 8 Bit Volatile Update Rate Background write
Display Format None Decimal Places 0
Coding RO, ND, NC, PT, BU
S.09.003 Fieldbus Links Free
Minimum 0 Maximum 255
Default None Units None
Type 8 Bit Volatile Update Rate Background write
Display Format None Decimal Places 0
Coding RO, ND, NC, PT, BU
S.09.004 Cyclic Mappings Free
Minimum 0 Maximum 255
Default None Units None
Type 8 Bit Volatile Update Rate Background write
Display Format None Decimal Places 0
Coding RO, ND, NC, PT, BU
S.09.008 Background cycles per second
Minimum 0 Maximum 65535
Default None Units None
Type 16 Bit Volatile Update Rate Background write
Display Format None Decimal Places 0
Coding RO, ND, NC, BU, PT
S.09.010 Sync Task % Free
Minimum 0 Maximum 255
Default None Units %
Type 8 Bit Volatile Update Rate Background write
Display Format None Decimal Places 0
Coding RO, ND, NC, PT, BU
To Next Page
Loading...
