To Next Page
M
mooredaleAug 1, 2025
How to select measurement mode on Nidek Medical Equipment?
- KkjonesAug 1, 2025
To select the measurement mode on your Nidek Medical Equipment, simply press the R/K button.
How to select measurement mode on Nidek Medical Equipment?
To select the measurement mode on your Nidek Medical Equipment, simply press the R/K button.
General| Printer | Built-in thermal printer |
|---|---|
| Power Supply | AC 100-240 V, 50/60 Hz |
| Type | Auto Refractor/Keratometer |
| Axis | 0 to 180° |
| Minimum Pupil Diameter | 2.0mm |
| Measurement Mode | Auto, Manual |
| Display | LCD |
| Measurement Range Sphere | -25D to +22D |
| Measurement Range (Keratometry) | 5.0 to 10.0mm (33.75 to 67.5D) |
Presents an overview of the device's operation sequence from startup to shutdown.
Outlines the steps required to prepare the device for measurement, including power and checks.
Describes how to perform simultaneous refractive and corneal curvature measurements.
Guides users on configuring device settings to customize various functions and operations.
Provides solutions for common device malfunctions like LCD, movement, and printing problems.
Details various error codes and their corresponding recommended solutions.
