Need help?Do you have a question about the Nidek Medical LM-1000 and is the answer not in the manual?
General| Display | 5.7-inch color LCD with touch screen |
|---|---|
| Power Supply | AC 100 to 240 V, 50/60 Hz |
| Dimensions | 214 (W) x 429 (D) x 243 (H) mm |
| Weight | 7.0 kg |
| Sphere | -25.00 to +25.00 D |
| Cylinder | 0 to ±10.00 D |
| Axis | 0 to 180° |
| Addition | 0 to +10.00 D |
| Prism | 0 to 10Δ |
Explains the USB interface for transmitting measured data from the LM-1000 series to an external computer.
Details communication specifications including interface type, data format, error detection, cable type, and transmission activation.
Describes parameters like CR Code and PrismTx that affect data export via the USB interface.
Highlights the necessity of a USB driver for data reception and directs users to the installation procedure section.
Defines the structure of the complete data transmitted, including control characters, identification, and data fields.
Details the specific output formats for various data fields like company name, SPH, CYL, AXIS, SE, ADD, PRISM, etc.
Explains the output format for manufacturer and model names, including ASCII codes.
Details the format for Spherical, Cylindrical, and Axis measurements, including identification codes.
Describes the SE value output format, specifically for contact lens measurement mode.
Explains the output format for primary and secondary addition powers.
Details the output format for prism measurements, varying with parameter settings.
Explains the output format for progressive length measurements on the LM-1200.
Details the output format for channel width and its position on the LM-1200.
Describes the output format for Pupillary Distance (PD) measurements on the LM-1200.
Explains the output format for near portion inside amount in progressive lens mode.
Details the output format for net prism measurements in normal lens mode.
Provides a concrete example of data output for single vision lens measurement in normal mode.
Shows an example of data output for progressive power lens measurement mode.
Provides an example of data output for single vision contact lens measurement.
Illustrates an example of data output specifically for the right eye in normal measurement mode.
Shows an example of data output for both left and right eye measurements in normal mode.
Example output for LM-1200, showing left/right data with PD measurement.
Second example output for LM-1200, detailing left/right data and PD measurement.
Provides an example of data output for left and right eyes in progressive power lens measurement mode.
Example output for LM-1200, including left/right data, PD, and near portion amount.
Demonstrates the maximum data size for normal measurement mode on LM-1000/1000P.
Shows the maximum data size for normal measurement mode on LM-1200.
Illustrates the maximum data size for progressive power measurement mode on LM-1000/1000P.
Provides the maximum data size for progressive power measurement mode on LM-1200.
Demonstrates the maximum data size for contact lens measurement mode.
Step-by-step instructions for installing the USB driver on a Windows 7 operating system.
Step-by-step instructions for installing the USB driver on a Windows XP operating system.
Step-by-step instructions for installing the USB driver on a Windows 2000 operating system.
Step-by-step instructions for installing the USB driver on a Windows 98 operating system.
Step-by-step instructions for installing the USB driver on a Windows ME operating system.
To Next Page