What to do if data is not printed out from Nidek Medical Measuring Instruments?
If data from your Nidek Medical Measuring Instruments isn't printing, try setting new printer paper or resetting the parameter.
How to fix a blank printout from Nidek Medical Measuring Instruments?
If the printer runs but the paper is blank when using Nidek Medical Measuring Instruments, ensure the paper is set with the correct side up.
What to do if the LCD does not turn on even though the power is on Nidek Medical Measuring Instruments?
If the LCD on your Nidek Medical Measuring Instruments doesn't turn on even with the power on, attempt to recall the ON state by pressing a button. You may also need to adjust the contrast knob.
How to fix LCD that does not turn on Nidek Medical Measuring Instruments?
If the LCD of your Nidek Medical Measuring Instruments does not turn on, try reconnecting it securely or check the power switch.
What to do if data cannot be read from Eye Care card on Nidek Medical Measuring Instruments?
If data cannot be read from the Eye Care card on your Nidek Medical Measuring Instruments, it might be due to a dirty contact in the Eye Care card slot. Clean its card reader. The contact in the Eye Care card slot may be dirty.
General| Axis | 0 to 180° |
|---|---|
| Prism | 0 to 10Δ |
| Contact Lens Measurement | Yes |
| Display | 5.7-inch color LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Sphere | -25.00 to +25.00 D |
| Cylinder | 0D to ±10.00D |
| Addition | 0 to +10.00D |
| Resolution | 0.01D (Sphere, Cylinder), 0.01Δ (Prism) |
| Accuracy | 0.12D (Cylinder) |
Discusses safety alerts, usage precautions, and after-use procedures for safe operation.
Outlines device overview, intended use, configuration, and display screens.
Explains measurement screens, prism/UV measurement, and parameter settings.
Covers checking contents, labels, and initial setup procedures before first use.
Outlines operation flow and steps to prepare the device for measurement.
Detailed procedures for setting and measuring various lens types.
Covers UV measurement, prism marking, and general lens marking.
Covers printing, data saving, and setting device parameters.
Procedures for connecting the lensmeter to refractors, computers via USB/RS-232C.
Instructions for connecting and using the optional foot switch for hands-free operation.
Addresses common problems, error messages, and their solutions.
Covers replacing printer paper, cleaning printer, and refilling ink cartridges.
Guides for cleaning protective glass, adjusting lens table, and general device cleaning.
Lists consumable and replacement parts available for the device.
Details device classifications and technical specifications for measurements.
Lists items included as standard accessories and optional accessories available for purchase.
Information on RF emissions compliance and immunity guidelines according to EMC standards.
To Next Page
