Need help?Do you have a question about the Nidek Medical LM-1800P and is the answer not in the manual?
General| Type | Auto Lensmeter |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Sphere | ±25D |
| Cylinder | ±10D |
| Axis | 0° to 180° |
| Contact Lens Measurement | Yes |
| PD Measurement | Yes |
| Measurement Accuracy (Angle) | +/- 1° |
| Power Supply (Alternative) | 50/60 Hz |
| Display | LCD Touch Screen |
Covers essential RS-232C and USB interface specifications, including connection and settings.
Provides step-by-step instructions for installing the USB driver on Windows for LM-1800P/LM-1800PD.
Explains the structure and format of commands and measurement data transmitted via RS-232C.
Details the specific commands used for controlling the LM and exchanging data via RS-232C.
Describes the various data formats and types transmitted from the LM, including measurement data.
Details the use of DTR/DSR signals for communication control between the LM and computer.
Step-by-step guide for installing the USB driver on Windows 7 operating systems.
Step-by-step guide for installing the USB driver on Windows 8 operating systems.
Step-by-step guide for installing the USB driver on Windows Vista operating systems.
Step-by-step guide for installing the USB driver on Windows XP operating systems.
Covers confirming and setting up the receiver computer for measurement data reception.
Provides steps and error messages for testing and verifying the network settings.
Defines the meaning and necessity of each tag used in the XML output data.
To Next Page