How to troubleshoot a Nidek Medical RT-5100 Measuring Instruments refractor that won't start?
If your Nidek Medical Measuring Instruments refractor isn't starting, even with the power on, ensure the power cord is properly connected to the wall outlet and that the system table is also turned on.
What to do if the keys on my Nidek Medical Measuring Instruments control box don't function?
If none of the keys on the control box of your Nidek Medical Measuring Instruments are working due to some abnormality, try turning the main switch of the system table off and then back on.
Why does my Nidek Medical RT-5100 Measuring Instruments print “Warning!! Memory failure on RB“?
If you see the message “Warning!! Memory failure on RB“ on your Nidek Medical Measuring Instruments, it means the interior battery in the relay box is low. To fix this, supply electrical power to the equipment for several hours to recharge the battery.
What to do if pressing the feed button on Nidek Medical RT-5100 doesn't feed paper?
If pressing the feed button on your Nidek Medical Measuring Instruments printer doesn't feed paper, replace the printer paper. Also, make sure that the “Printer” parameter is not set to “Off.”
Why does my Nidek Medical RT-5100 display “Setup data is initialized”?
If your Nidek Medical Measuring Instruments displays “Setup data is initialized”, it indicates that the interior battery in the control box is low on power. Recharge the battery by supplying electrical power to the equipment for several hours and contact NIDEK or your authorised distributor.
Why does the display disappear suddenly on my Nidek Medical RT-5100?
If the display and presented chart on your Nidek Medical Measuring Instruments suddenly disappear, the device may have entered power saving mode. Press any key to restore the display.
What to check if pressing print doesn't work on Nidek Medical Measuring Instruments?
If pressing the print button on your Nidek Medical Measuring Instruments doesn't print the result, check that the printer paper is loaded with the correct side up.
General| Brand | Nidek Medical |
|---|---|
| Model | RT-5100 |
| Category | Measuring Instruments |
| Language | English |
Explains the meaning of signal words used for safety alerting.
Details essential steps and environmental conditions required before operating the device.
Provides a guide to diagnose and resolve common issues with the RT-5100 device.
Details the importance and method for cleaning the measuring windows for accurate readings.
Lists available replacement parts for the RT-5100.
Provides a general description of the RT-5100 refractor and its components.
Lists compatible NIDEK and other devices that can be connected to the RT-5100.
Details the physical components and layout of the RT-5100 refractor head and control box.
Identifies and explains the various cautionary labels and symbols on the device.
Outlines essential setup steps and checks to perform before the initial operation.
Covers the procedures for powering on, starting, and safely shutting down the RT-5100.
Outlines the sequence of steps for operating the RT-5100, from startup to data output.
Explains methods for inputting objective and subjective patient data into the RT-5100.
Covers adjusting prism powers in both rectangular and polar coordinate systems.
Outlines the essential steps for setting up the refractor head and patient for examination.
Describes the use of pre-programmed refraction sequences for patient examination.
Explains how to display and control various visual acuity charts and functions.
Covers automatic and semi-automatic adjustment of lens powers for optimal patient vision.
Covers printing measurement data, including options for QR codes and 21 Point Exam results.
Explains how to display and manage all measured patient data in a list format.
Describes how to display eye condition diagrams for patient explanation.
Details how to check the range of clear vision based on measurement values.
Explains how to set and use various auxiliary lenses during examinations.
Covers creating, clearing, and operating custom examination programs.
Provides instructions for calibrating the touch-screen panel for accurate response.
Details the various system parameters that can be configured to customize device behavior.
Describes the procedure for clearing all AR and LM data stored in the relay box.
Explains how to export measurement data to an external computer or NIDEK OPD-Scan III.
Covers exporting patient refraction data to an optional Eye Care card.
Details procedures for various visual acuity tests, including unaided, aided, and with addition powers.
Explains methods for testing and refining astigmatism using clock dials and cross cylinder lenses.
Covers methods for refining spherical power using red-green and cross-grid tests.
Details various tests for evaluating binocular visual functions like balance, phorias, and stereo acuity.
Explains how to test the divergence ability of the eye.
Details how to test the convergence ability of the eye.
Explains the procedure for measuring the near point of convergence break point.
Details how to measure the near point of accommodation.
Explains how to measure negative relative accommodation at a specified working distance.
Details how to measure positive relative accommodation at a specified working distance.
Guides on navigating between the chart list and the 21 Point Exams list.
Provides a detailed list and description of the 21 Point Exams available in the Plus Package.
Describes how to view and interpret the results of the 21 Point Exams.
Guides on customizing settings for charts and auxiliary lenses in 21 Point Exams.
Lists the device's classification according to relevant directives and standards.
Provides detailed technical specifications for the refractor head, control box, and measurable ranges.
Lists all components included in the standard RT-5100 package.
Explains the auto and semi-auto adjustment functions for spherical and cylindrical powers.
Shows which auxiliary lenses are linked to specific charts when Chart link is enabled.
Provides a table for converting visual acuity values between decimal, feet, and meters.
Lists preset addition powers based on patient age for convenience.
Details the pre-programmed examination sequences available on the RT-5100.
Provides information on the device's electromagnetic emissions and compliance.
Details the device's immunity to electromagnetic disturbances and recommended environments.
To Next Page
