Need help?Do you have a question about the Nidek Medical AR-600A and is the answer not in the manual?
General| Axis | 0° to 180° |
|---|---|
| Measurement Range (Cylinder) | 0 to ±10D |
| Pupil Diameter Measurement Range | 2.0 mm to 9.5 mm |
| Measurement Resolution | 0.01D |
| Display | LCD |
| Power Supply | AC 100V to 240V |
Lists essential check flows and items to be verified for instrument operation and maintenance.
Follow procedures in '2.1 Check flows' for correct after-sales service. Refer to Operator's Manual for procedures.
Turn OFF power and disconnect cord before disassembly. Take care not to lose screws or drop parts.
Diagnostic flowchart to identify and resolve instrument malfunctions based on observed symptoms.
Detailed troubleshooting steps for various error codes, symptoms, and functional issues.
Procedure to check AC voltage at the wall outlet and inlet terminals for proper supply.
Detailed steps for removing and replacing the PC1 MAIN circuit board.
Procedure for removing and installing the PC2 DISPLAY circuit board.
Overview of AR adjustment modes and common operations for accessing and navigating them.
To Next Page