What to do if data is not printed out from Nidek Medical Measuring Instruments?
If data from your Nidek Medical Measuring Instruments isn't printing, try setting new printer paper or resetting the parameter.
How to fix a blank printout from Nidek Medical Measuring Instruments?
If the printer runs but the paper is blank when using Nidek Medical Measuring Instruments, ensure the paper is set with the correct side up.
What to do if the LCD does not turn on even though the power is on Nidek Medical Measuring Instruments?
If the LCD on your Nidek Medical Measuring Instruments doesn't turn on even with the power on, attempt to recall the ON state by pressing a button. You may also need to adjust the contrast knob.
How to fix LCD that does not turn on Nidek Medical Measuring Instruments?
If the LCD of your Nidek Medical Measuring Instruments does not turn on, try reconnecting it securely or check the power switch.
What to do if data cannot be read from Eye Care card on Nidek Medical Measuring Instruments?
If data cannot be read from the Eye Care card on your Nidek Medical Measuring Instruments, it might be due to a dirty contact in the Eye Care card slot. Clean its card reader. The contact in the Eye Care card slot may be dirty.
General| Axis | 0 to 180° |
|---|---|
| Prism | 0 to 10Δ |
| Contact Lens Measurement | Yes |
| Display | 5.7-inch color LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Sphere | -25.00 to +25.00 D |
| Cylinder | 0D to ±10.00D |
| Addition | 0 to +10.00D |
| Resolution | 0.01D (Sphere, Cylinder), 0.01Δ (Prism) |
| Accuracy | 0.12D (Cylinder) |
To Next Page
