Nietz SSN Series User Manual

NIetz Electric Co.,Ltd Soft starter SSN/SSA serie User Manual
19
9.3 parameter setting and inquiry(Current Limit)
If the Current Limit mode is selected, the flow chart of the related parameters setting is
show in figure 9-3。
Current Limit mode A08882
pressPRG
Starting current limit A48300 press▲or▼ to modify
pressPRG
Start time A58830 press▲or▼ to modify
pressPRG
Over curr. protect value A68400 press▲or▼ to modify
pressPRG
Current unbalance factor A78830 press▲or▼ to modify
pressPRG
Control mode select A88881 press▲or▼ to modify
pressPRG
SCR trigger select A98882 press▲or▼ to modify
pressPRG
Start overload level Ab8884 press▲or▼ to modify
pressPRG
Over running current protectAc8200 press▲or▼ to modify
Stop mode selec Ad8881 Ad8882 press▲or▼ to modify
pressPRG
Soft stop factor Ar8885 press▲or▼ to modify
pressPRG
figure9-3
NOTE:
1. When any of one parameter is selected, press whether PRG key (change page) or STOP key to return
READY state Sr8rdy, the modified parameters will be saved automatic.
2. When modify any of the parameter, press STOP key to return the READY stateSr8rdy.

Nietz SSN Series Specifications

General

Brand	Nietz
Model	SSN Series
Category	Controller
Language	English