Indicates the backlight brightness of the LCD
viewing screen. Adjust by short-pressing the
button. There are 8 backlight levels.
When the microphone icon is visible, the
microphone has been set to on and audio is
recorded during filming in Video mode.
5. Modes overview
• The Corsac has four modes. Press M to switch from one mode to the
next. The four different modes are:
o Video mode, for recording videos. This is the default mode when
the device is turned on.
o Photo mode, for capturing still images.
o Playback mode, for watching and deleting photos/videos stored
on the memory card.
o Settings mode, for configuring settings such as date/time and
automatic powering off.
6. Video mode
• Video mode is the default mode when the device powers on.
• To enter video mode from a different mode, press M until the
icon displays in the top left-hand corner of the LCD screen.
• The top centre of the LCD screen shows how much space is left for
recording video onto the memory card, in HH:MM:SS format (see
section 5).
• In Video mode, press OK/ to start/stop recording. When
recording is stopped, the video is automatically saved onto the
memory card.
• Press to digitally zoom in at multiple magnification levels.
To Next Page
Loading...
