183
i
Choose On to use optical vibration reduction with compatible
1NIKKOR lenses.
Select On to enable electronic vibration reduction in Motion
Snapshot mode (0 88), when using the movie-record button,
and when HD movie is selected in advanced movie mode
(0 49). This feature is available even if the attached 1 NIKKOR
lens does not support vibration reduction. Note that there will
be a slight delay before recording begins. The area recorded is
shown by guides in the display; the appearance of the guides
depends on the option selected for Electronic VR (movies).
Optical VR
A
Vibration Reduction
When the camera is panned, vibration reduction applies only to
motion that is not part of the pan (if the camera is panned horizontally,
for example, vibration reduction will be applied only to vertical shake),
making it much easier to pan the camera smoothly in a wide arc. The
composition may appear to change after the shutter is released, but
this does not indicate a malfunction.
A
Optical VR
If the lens supports both normal and active vibration reduction, select-
ing On will enable active vibration reduction, reducing both the rela-
tively mild camera shake that occurs when the photographer is
stationary and the strong camera shake associated with shooting from
a moving vehicle or while walking.
Electronic VR (Movies)
Electronic vibration reduction on Electronic vibration reduction off
To Next Page
Loading...
Need help?
General
