10
En
Fr
￭ Internal display
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: "Failure to measure" or "Unable to measure"
* Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
Unit of measure (m/yd.)
Target mark
Laser irradiation mark
Battery condition
Distance
First Target Priority mode
Distant Target Priority mode
Horizontal Distance mode
To Next Page
Loading...
Need help?
General
