E4
Reference Section
c Landscape
• Press the d button to select Noise reduction burst or Single shot in
Landscape.
• Noise reduction burst: This enables you to shoot a sharp landscape with a
minimum of noise.
- Press the shutter-release button all the way to capture a series of images
which are combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still
until a still image is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
•Single shot (default setting): Saves images with emphasized outlines and
contrast.
- One image is captured when the shutter-release button is pressed all the way.
y M x Scene auto selector
• When you point the camera at the subject, the camera automatically recognizes
the optimum scene mode from the list below and adjusts the shooting settings
accordingly.
• Depending on shooting conditions, the camera may not select the desired
scene mode. In this case, select another shooting mode (A24).
e Portrait (for taking close-up portraits of one or two people)
b
Portrait (for taking portraits of large numbers of people, or images in
which the background takes up a large portion of the frame)
f Landscape
h Night portrait (for taking close-up portraits of one or two people)
c
Night portrait (for taking portraits of large numbers of people, or images
in which the background takes up a large portion of the frame)
g
Night landscape
• The camera shoots images continuously and combines and saves
them as a single image in the same way as when Hand-held in X
(night landscape) (E3) is selected.
i Close-up
j Backlighting (for taking pictures of subjects other than people)
d Backlighting (for taking portrait pictures)
d Other shooting scenes
To Next Page
Loading...
Need help?
General
