12
The Basics of Shooting and Playback
Preparation 2 Insert a Memory Card
1 Turn off the camera and then
open the battery-chamber/
memory card slot cover and
internal cover.
• When the camera turns off, the
power-on lamp and the display turn
off.
• Before opening the covers, hold the
camera upside down to prevent the batteries from falling out.
2 Insert a memory card.
• Slide the memory card in until it clicks into place.
B Inserting a Memory Card
Inserting a memory card upside down or backwards
could damage the camera and the memory card. Be sure
to check that the memory card is in the correct orientation.
3 Close the internal cover and
then the battery-chamber/
memory card slot cover.
• While pushing down on the batteries
with the internal cover, slide the
cover toward the center of the
camera. Pushing the cover without
sliding it may damage the camera.
1
2
3
4
5
1
2
3
4
To Next Page
Loading...
