22
First Steps
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
2 Tap the desired language.
If the desired language is not displayed, tap A or B to
view other language options.
For more information about operating the touch panel,
see “Operating the Touch Panel” (A 8).
.
3 Tap Yes.
If No is tapped, the date and time will not be set.
4 Tap C or D to select your home time zone
(A 143) and tap I.
D Daylight Saving Time
If daylight saving time is in effect, tap p in the time zone selection
screen displayed in step 4 to turn on the daylight saving time
option.
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
tap p again.
Language
Čeština Dansk
Deutsch English
Español Ελληνικά
Français Indonesia
No
Yes
Set time and date?
Date
Londo n
Casablanca
Londo n
Casablanca
To Next Page
Loading...
