58
Connecting to Televisions, Computers, and Printers
4
Place the camera in the COOL-STATION and turn it
on. A PictBridge start-up screen will be displayed.
The camera will then enter full-frame playback
with the PictBridge logo displayed in the moni-
tor.
Connecting the Printer
3
Turn the printer on.
2
Connect COOL-STATION to the printer using the
supplied USB cable.
1
Turn the camera off .
USB
PTP (the default option) must be selected for Interface > USB in the camera setup
menu before the camera can be connected to a printer ( 89).
To Next Page
Loading...
