E72
The Setup Menu
Reference Section
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (A 21).
Select the time allowed to elapse before the camera enters standby mode from
30 s
,
1 min
(default setting),
5 min
, and
30 min
.
d button M z tab M Auto off
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for about three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button, c button, or b (e movie-record) button
- Rotating the mode dial
C Auto Off
he time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• While menus are displayed: 3 minutes (when auto off is set to 30 s or 1 min)
• During slide show playback: Up to 30 minutes
• When the AC Adapter EH-62F is connected: 30 minutes
To Next Page
Loading...
