14
The Basics of Shooting and Playback
The Basics of Shooting and Playback
Preparation 1 Insert the Battery
1 Open the battery-chamber/memory card slot
cover.
2 Insert the included EN-EL12
battery (rechargeable Li-ion
battery).
• Use the battery to push the orange
battery latch up in the direction
indicated by the arrow (1), and fully
insert the battery (2).
• When the battery is inserted correctly,
the battery latch will lock the battery
in place.
B Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be sure
to check that the battery is in the correct orientation.
3 Close the battery-chamber/memory card slot
cover.
• Charge the battery before the first use or when the
battery is running low (A 16).
• While the battery-chamber/memory card slot cover is
open, the camera cannot be turned on. Additionally,
the battery inserted in the camera cannot be charged.
Battery latch
To Next Page
Loading...
