32
The Basics of Shooting and Playback
Step 6 Delete Unwanted Images
1 Press the l button to delete the image
currently displayed in the monitor.
2 Press the multi selector H or I to select the
desired deletion method and press the k
button.
• Current image: The image currently displayed is
deleted. If the key picture of a sequence (A 51) is
selected, all images in the sequence are deleted.
• Erase selected images: Multiple images can be
selected and deleted. See “Operating the Erase Selected Images Screen” (A 33) for
more information.
• All images: All images are deleted.
• To exit without deleting the image, press the d button.
3 Press H or I to select Yes and press the k
button.
• Deleted images cannot be recovered.
• To cancel, press H or I to select No and press the k
button.
Current image
All images
Erase selected images
Delete
Yes
No
Erase 1 image?
B Notes About Deletion
• Deleted images cannot be recovered. Copy important images to a computer before deleting
them from the camera.
• Protected images (A 80) cannot be deleted.
B Deleting Images Captured Using Continuous Shooting
• Each time images are captured continuously, they make up a group of images called a sequence,
and by default only the first image of a sequence (called the “key picture”) is displayed to represent
the sequence (E7).
• When you press the d button during key picture playback, all images in the key picture’s
sequence can be deleted (E9).
• If you want to delete individual images in a sequence, press the k button before pressing the l
button and display all images in the sequence individually.
C Deleting the Last Image Captured While in Shooting Mode
In shooting mode, press the l button to delete the last image that was saved.
To Next Page
Loading...
