Reference Section
E24
Viewing Images in a Sequence
Images captured continuously or with the self-collage function are saved as a
sequence.
The first image of a sequence is used as the key
picture to represent the sequence when
displayed in full-frame playback mode or
thumbnail playback mode. For the self-collage
function, a collage image is used as the key
picture.
To display each image in the sequence
individually, press the k button.
After pressing the k button, the operations
listed below are available.
• To display the previous or next image, rotate
the multi selector or press JK.
• To display images that are not included in the
sequence, press H to return to the key
picture display.
• To display images in a sequence as
thumbnails, or to play them back in a slide
show, set Sequence display options to Individual pictures in the
playback menu (E86).
B Sequence Display Options
Images captured continuously with cameras other than this camera cannot be
displayed as a sequence.
C Playback Menu Options Available When Using Sequence
• When images in a sequence are displayed in full-frame playback mode, press the
d button to select functions in playback menu (A52).
• If you press the d button when a key picture is displayed, the following settings
can be applied to all images in the sequence:
- Mark for Wi-Fi upload, Protect, Copy
Viewing and Deleting Images Captured
Continuously (Sequence)
15/11/2015 15:30
0004.
JPG
1
/
5
1
/
5
15/11/2015 15:30
Back
To Next Page
Loading...
