19
Basic Shooting and Playback Operations
1 Press the l (delete) button to
delete the image currently
displayed in the monitor.
2 Use the multi selector HI to
select the desired deletion
method and press the k button.
• To exit without deleting, press the d
button.
• When Erase selected images is selected,
see “The Image Selection Screen”(A53).
3 Select Yes and press the k
button.
• Deleted images cannot be recovered.
B Deleting Images Captured Continuously (Sequence)
• Images captured continuously are saved as a
sequence, and only the first image of the
sequence (the key picture) is displayed in
playback mode.
• If you press the l button while a key picture is
displayed for a sequence of images, all images in
the sequence are deleted.
• To delete individual images in a sequence, press
the k button to display them one at a time and press the l button.
C Deleting the Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was
saved.
Delete Images
All images
Erase selected images
Current image
Delete
15/11/2015 15:30
0004.
JPG
1
/
5
To Next Page
Loading...
