Select the
•"
(location data options) menu (CIJ22), and set Record location
data
in
Location data options
to
On,
the camera starts receiving signals from
positioning satellites.
Location data reception
can
be checked on the
shooting screen.
•
~~or
~8:
Signals
are
being received from
four or more satellites, or from three satellites,
and positioning
is
being performed.
•
~:Signals
are
being received,
but
positioning
is
not
possible.
•
~:Signals
are
not received.
Recording
the
Shooting Location Data on
the
Image
• When shooting while positioning
is
being performed, the obtained location data
(latitude and longitude)
are
recorded on the images
to
be shot.
• When
Compass display
in
Electronic compass
is
set
to
On, a rough direction
of
the shooting
is
also recorded.
Recording
the
Log
• When selecting Start log
in
Create log
in
the location data options menu, while
positioning
is
being performed, the location data
of
places you visit with the
camera
is
recorded at the certain interval.
• The recorded log (location data)
can
be displayed on the map, when you store the
log on the memory card and then select
View
log
in
the location data options
menu.
To
save
the recorded log, end log recording
in
Create log and select Save
log.
Displaying Maps
•
To
display the current position on the map
if
positioning
is
being performed,
press
the
fJ
(map) button on the shooting screen.
•
To
display the shooting location on the map,
play back the images which have the location
data recorded, and
press
the
fJ
button.
24 Other Functions
To Next Page
Loading...
