Nikon coolpix7900 - Camera Disassembly Procedures; Safety Warnings and Core Disassembly Steps

VAA46003-R.3659.A
- D1･ E7900 -
Disassembly
Note : ① Be sure to remove the SD memory card and batteries before disassembly.
② When disassembling, make sure to memorize the processing state of wires, screws
to be xed and their types, etc.
③ Because electrical parts are easily damaged by static electricity, make sure that you
are well earthed/grounded.






Points to notice for Lead-free solder products
・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder. They
cannot be used in common.