Upgrading the COOLPIX775 Firmware
— Macintosh —
Thank you for choosing a Nikon product. This guide describes how to upgrade the
camera firmware for the COOLPIX775.
Get ready
To upgrade the firmware for the COOLPIX775, you will need:
• A COOLPIX775 digital camera
• A UC-E2 USB cable
OR a CompactFlash card reader
• One of the following power sources:
— An EH-21 AC adapter / battery charger
— A fully-charged EN-EL1 rechargeable battery
— A fresh 2CR5 (DL245) battery
• A Nikon-approved CompactFlash memory card that has been formatted in the COOLPIX775
•
The
Nikon Guide to Digital
Photography for the
COOLPIX775
Check the current firmware version for the COOLPIX775
1
Turn the mode dial to (playback mode).