Nikon D3 - Page 161

135
Z
❚❚ Exposure and Flash Bracketing
1 Select flash or exposure bracketing.
Choose the type of bracketing to be
performed using Custom Setting e4
([Auto bracketing set], pg. 327).
Choose
[AE & flash] to vary both exposure and
flash level (the default setting), [AE only]
to vary only exposure, or [Flash only] to vary only flash level.
2 Choose the number of shots.
Pressing the BKT button, rotate the main command dial to
choose the number of shots in the bracketing sequence.
The
number of shots is shown in the top control panel.
At settings other than zero, a M icon and exposure and
flash bracketing indicator will be displayed in the
viewfinder and top control panel.
BKT button
Main command
dial
Top control panel
Number of shots
Exposure and flash
bracketing indicator