199
l
❚❚ Choosing a Flash Mode
To choose the flash mode, press
the M button and rotate the main
command dial until the desired
flash mode is selected in the top
control panel:
1 Available only in exposure modes e and g.
In modes f and h, front-
curtain sync is selected when M button is released.
2In exposure modes e and g, flash-sync mode will be set to slow
rear-curtain sync when the M button is released.
3 Y icon blinks if flash unit does not support red-eye reduction.
4 Red-eye reduction with slow sync is available only in exposure
modes e and g.
In modes f and h, red-eye reduction is selected when
the M button is released.
M button
Main-command
dial
Front-curtain sync Slow sync
1
Rear-curtain sync
2
Red-eye reduction with
slow sync
3, 4
Red-eye reduction
3
To Next Page
Loading...
