Nikon D3 - E1: Flash Sync Speed; E: Bracketing;Flash

325
U
e1: Flash Sync Speed
This option controls flash sync speed.
A Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in shutter-priority auto or
manual exposure modes, select the next shutter speed after the slowest
possible shutter speed (30 s or bulb).
An X (flash sync indicator) will be
displayed in the viewfinder and top control panel.
e: Bracketing/Flash
Option Description
1/250 s (Auto FP)
Auto FP high-speed sync is used with SB-800, SB-600,
and SB-R200 flash units. If other flash units are used,
shutter speed is set to
1
/250 s. When the camera
shows a shutter speed of
1
/250 s in exposure mode e
or g, auto FP high-speed sync will be activated if the
actual shutter speed is faster than
1
/250 s.
1/250 s (default) Flash sync speed set to
1
/250 s.
1/200 s Flash sync speed set to
1
/200 s.
1/160 s Flash sync speed set to
1
/160 s.
1/125 s Flash sync speed set to
1
/125 s.
1/100 s Flash sync speed set to
1
/100 s.
1/80 s Flash sync speed set to
1
/80 s.
1/60 s Flash sync speed set to
1
/60 s.