Nikon D3 - Page 218

192
l
The following features are available with the SB-800, SB-600,
SB-400, SB-R200, and SU-800:
1 Only available when SU-800 is used to control other flash units.
2 Standard i-TTL flash for digital SLR is used with spot metering or when selected
with flash unit.
3 Standard i-TTL flash for digital SLR is used with spot metering.
4 Selected with flash unit.
Non-TTL auto (A) selected automatically if non-CPU lens
is attached without specifying lens data using [Non-CPU lens data].
5Auto aperture (AA) is used regardless of mode selected with flash unit.
Non-TTL
auto (A) selected automatically if non-CPU lens is attached without specifying
lens data using [Non-CPU lens data].
6 Selected with flash unit.
7 Select [1/250 s (Auto FP)] for Custom Setting e1 ([Flash sync speed], pg. 325).
8CPU lens required.
Flash unit
SB-800 SB-600 SB-400
Advanced Wireless Lighting
Commander Remote
Flash mode/feature SB-800 SU-800
1
SB-800 SB-600 SB-R200
i-TTL
i-TTL balanced fill-flash
for digital SLR
✔
2
✔
2
✔
3
✔ ✔ ✔✔✔
AA Auto aperture ✔
4
——✔
5
✔
5
✔
5
——
A Non-TTL auto ✔
6
——✔
5
— ✔
5
——
GN Range-priority manual ✔ ——— — ———
M Manual ✔✔— ✔ ✔ ✔✔✔
RPT Repeating flash ✔ ——✔✔✔✔—
Auto FP High-Speed Sync
7
✔✔— ✔ ✔ ✔✔✔
FV lock ✔✔✔✔ ✔ ✔✔✔
AF-assist for multi-area AF
8
✔✔— ✔✔———
Flash Color Information
Communication
✔✔✔✔ — ———
REAR Rear-curtain sync ✔✔✔✔ ✔ ✔✔✔
Y Red-eye reduction ✔✔✔✔ — ———
Auto zoom ✔✔— ✔ — ———