217
t
❚❚ Pausing Interval Timer Photography
Interval time photography can be paused by:
• Pressing the J button between intervals
• Highlighting [Start] > [Pause] in the interval timer menu and
pressing J
• Turning the camera off and then on again (if desired, the
memory card can be replaced while the camera is off)
• Selecting live view (a), self-timer (E), or mirror-up (M
UP) release
modes
To resume shooting:
1 Choose a new starting
trigger.
Choose a new starting trigger
and start time as described
on page 213.
2 Resume shooting.
Highlight [Start] > [Restart]
and press J. Note that if
interval timer photography
was paused during shooting,
any shots remaining in the
current interval will be canceled.
To Next Page
Loading...
