Nikon D3 - Connecting to a Computer

230
I
A Image Review
When [On] is selected for [Image review] in the playback menu (pg. 287),
photographs are automatically displayed in the monitor for about 20 s
(the default setting) after shooting. In single-frame, self-timer, and mirror-
up release modes, photographs are displayed one at a time as they are
taken. In continuous release mode, display begins when shooting ends,
with the first photograph in the current series displayed.
A Two Memory Cards
If two memory cards are inserted, holding the N
button and pressing 1 in full-frame or thumbnail
playback will display the menu shown at right.
Highlight the desired slot and press J.
The same
method can be used to choose a slot when
selecting images for operations in the playback
(pg. 278) or retouch menus (pg. 360) or when
choosing an image as the source for preset white balance (pg. 160).
A See Also
For information on choosing how long the monitor will remain on when
no operations are performed, see Custom Setting c4 [Monitor off delay]
(pg. 318).
The roles of the multi selector buttons can be reversed, so that the 1 and
3 buttons display other images and the 4 and 2 buttons control photo
information. See Custom Setting f3 [Photo info/playback] (pg. 331) for
details.