Nikon D3 - Page 395

369
U
4 Select the highlighted
photograph.
Press J to select the
highlighted photograph and
return to the preview display.
The selected image will appear
as [Image 1].
5 Set gain.
Optimize exposure for the
overlay by pressing 1 or 3 to
select the gain for image 1
from values between 0.1 and
2.0.
The default value is 1.0;
selecting 0.5 cuts gain in half, while selecting 2.0 doubles gain.
The effects of gain are visible in the [Preview] column.
6 Select the second
photograph.
Press 4 or 2 to highlight
[Image 2].
Repeat Steps 2–5 to
select the second photo and
adjust gain.
7 Highlight the [Preview]
column.
Press 4 or 2 to highlight the
[Preview] column.