394
n
5 Close the clock battery chamber.
Slide the clock battery chamber cover
towards the back of the main battery
chamber until it clicks into place.
6 Replace the main battery.
Reinsert the EN-EL4a.
7 Set the camera clock.
Set the camera to the current date and
time (pg. 39).
Until the date and time
have been set, the B icon will flash in
the top control panel.
D Inserting the Clock Battery
Insert the clock battery in the correct orientation.
Inserting the battery
incorrectly could not only prevent the clock from functioning but could
damage the camera.
To Next Page
Loading...
