Nikon D3X - Page 105

79
N
A Portrait (Tall-Orientation) Photographs
When framing shots in portrait (“tall”) orientation, use the command dials
to select the focus area.
For more information, see Custom Setting f4
([Assign FUNC. button], pg. 337).
A See Also
For information on choosing when the focus point is illuminated, see
Custom Setting a6 ([Focus point illumination], pg. 310).
For information
on setting focus-point selection to “wrap around,” see Custom Setting a7
([Focus point wrap-around], pg. 311). For information on choosing the
number of focus points that can be selected using the multi selector, see
Custom Setting a8 ([AF point selection], pg. 311). For information on
choosing the role of the B button for vertical shooting, see Custom
Setting a10 ([Vertical AF-ON button], pg. 313). For information on
changing the role of the multi selector center button, see Custom Setting
f1 ([Multi selector center button], pg. 331).