Nikon D3X - Page 155

129
Z
Exposure compensation can be set to values between –5 EV
(underexposure)
and +5 EV (overexposure) in increments of
1
/3 EV. In general, choose positive values to make the subject
brighter, negative values to make it darker.
At values other than ±0, the 0 at the center of the electronic
analog exposure displays will flash and a E icon will be displayed
in the viewfinder and top control panel after you release the E
button.
The current value for exposure compensation can be
confirmed in the electronic analog exposure display by pressing
the E button.
Normal exposure can be restored by setting exposure
compensation to ±0.
Exposure compensation is not reset when
the camera is turned off.
A See Also
For information on choosing the size of the increments available for
exposure compensation, see Custom Setting b3 ([EV steps for exposure
comp.], pg. 314).
For information on making adjustments to exposure
compensation without pressing the E button, see Custom Setting b4
([Easy exposure compensation], pg. 315).
–1 EV No exposure
compensation
+1 EV