210
t
❚❚ Interrupting Multiple Exposures
Selecting [Multiple exposure] in the
shooting menu while a multiple exposure is
being recorded displays the options shown
at right. To interrupt a multiple exposure
before the specified number of exposures
have been taken, highlight [Cancel] and
press J. If shooting ends before the
specified number of exposures have been taken, a multiple
exposure will be created from the exposures that have been
recorded to that point. If [Auto gain] is on, gain will be adjusted to
reflect the number of exposures actually recorded. Note that
shooting will end automatically if:
• A two-button reset is performed (pg. 204)
• The camera is turned off
• The battery is exhausted
• Pictures are deleted
To Next Page
Loading...
