Nikon D3X - Page 418

392
n
Remote
terminal
accessories
The D3X is equipped with a ten-pin
remote terminal for remote control
and automatic photography.
The
terminal is provided with a cap, which
protects the contacts when the
terminal is not in use.
The following
accessories can be used (all lengths are approximate):
• Remote Cord MC-22: Remote shutter release with blue, yellow,
and black terminals for connection to a remote shutter-
triggering device, allowing control via sound or electronic
signals (length 1 m /3 ft. 3 in.).
• Remote Cord MC-30: Remote shutter release; can be used to
reduce camera shake or keep the shutter open during a time
exposure (length 80 cm /2 ft. 7 in.).
• Remote Cord MC-36: Remote shutter release; can be used for
interval timer photography or to reduce camera shake or
keep the shutter open during a time exposure.
Equipped
with back-lit control panel, shutter-release lock for use in
bulb photography, and timer that beeps at one-second
intervals (length 85 cm /2 ft. 9 in.).
• Extension Cord MC-21: Can be connected to ML-3 or MC-series
20, 22, 23, 25, 30, or 36. Only one MC-21 can be used at a
time (length 3 m /9 ft. 10 in.).
• Connecting Cord MC-23: Connects two cameras for simultaneous
operation (length 40 cm /1 ft. 4 in.).