53
s
5 Choose single-servo
autofocus.
Rotate the focus-mode selector
until it clicks into place
pointing to S (single-servo
autofocus).
At this setting, the
camera will automatically focus
on the subject in the selected
focus point when the shutter-release button is pressed
halfway.
Pictures can only be taken when the camera is in
focus.
6 Choose matrix metering.
Press the metering selector
lock button and rotate the
metering selector to Y (matrix
metering).
Matrix metering
uses information from the
1,005-segment RGB sensor to
ensure optimal results for the
entire frame.
Focus-mode
selector
Metering selector
To Next Page
Loading...
