12 Introduction: First Steps
Inserting Memory Cards
The camera stores pictures on Secure Digital (SD) memory cards (available separately). See
“Approved Memory Cards” for information on approved memory cards ( 102).
1
Insert a memory card.
Removing Memory Cards
1. Confirm that the access lamp is off.
2. Turn the camera off and open the memory card slot cover.
3. Press the card in to eject (
c). The card can then be removed by hand
(d).
1.1 Before inserting or removing memory cards, turn the cam-
era off and open the card slot cover.
1.2 Slide the memory card in as shown at right until it clicks
into place. The memory card access lamp will light for
about a second. Close the memory card slot cover.
Front
To Next Page
Loading...
