62 Reference: Connecting to a Computer, Printer, or TV/Viewing Photographs on TV
Viewing Photographs on TV
An EG-D100 video cable (available separately; 103) can be used to connect the camera to
a television or VCR for playback or recording. Use of an optional EH-5 AC adapter and EP-5
AC adapter connector is recommended for extended playback ( 103).
1
Choose the appropriate video mode ( 83).
2
Turn the camera off. Always turn the camera off before con-
necting or disconnecting the video cable.
3
Connect the video cable as shown.
Connect to video device Connect to camera
4
Tune the television to the video channel.
5
Turn the camera on and press to begin playback. During
playback, images will be displayed on the television or
recorded to video tape; the camera monitor will remain off.
To Next Page
Loading...
