Nikon D5100 - ISO Sensitivity

󲩎󲨺󲨹󲨫󲨩󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨪󲨭󲨦󲨹
󲨥󲨘󲨼󲨬󲨱 󳉗 󲨼󲨭󲨩󲨨󲨨󲨘󲨥
#63×2
[Purple] x2
[Black]
[Red]
#62
#5017
#656×2
#B5003
TA-0015 (13×28)
Remove the two rubbers (#63) from the sub-frame (#62).•
SZ-DC/DC PCB unit
Peel off the tape [TA-0015 (13×28)].
Take out the two screws (#656).
Remove the SZ-DC/DC PCB unit (#B5003).
Disconnect the connection-FPC (#5017).
Unsolder the four wires.
•
•
•
•
•
Back side
Sub-frame
User ID:NHK