Nikon D5100 - Sq.base.unit

󲩎󲨺󲨹󲨫󲨩󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨪󲨭󲨦󲨹
󲨥󲨘󲨹󲨯 󳉗 󲨼󲨭󲨩󲨨󲨨󲨘󲨥
#B2177
#29
#602×2
#602×2
①
②
③
④
SQ base unit
Attach the shading sheet (#29).
Turn the gear indicated in red in the direction of the arrow to lower the mirror of the aperture lever
section of the SQ base unit (#B2177).
Mount the SQ base unit (#B2177) by tting its aperture lever section in the below gap of the front body.
•
•
•
Attaching position
Tighten the four screws (#602) temporarily.
With the SQ unit being lifted slightly, hook the spring to the mirror unit.
Do nal tightening of the four screws (#602) in numeric order from
①
to
④
.
After assembling the above, check whether the aperture lever section works smoothly.
•
•
•
•
Direction for
positioning
Spring
User ID:NHK