Nikon D5100 - SZ-DC;DC.pcb.unit

󲩎󲨺󲨹󲨫󲨩󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨪󲨭󲨦󲨹
󲨥󲨘󲨹󲨪󲨪 󳉗 󲨼󲨭󲨩󲨨󲨨󲨘󲨥
[Purple] x2
[Black]
[Red]
#5017
#656×2
#B5003
TA-0015 (13×28)
SZ-DC/DC PCB unit
Solder the four wires.
Mount the SZ-DC/DC PCB unit (#B5003).
Tighten the two screws (#656).
Connect the connection-FPC (#5017).
•
•
•
•
Back side
Attach the tape [TA-0015 (13×28)].•
Attach by covering
each corner.
Attaching position
User ID:NHK