57
Focus
To focus using autofocus,
rotate the focus-mode
selector to AF and follow the
steps below to choose
autofocus and AF-area modes.
For information on focusing
manually, see page 60.
❚❚ Choosing a Focus Mode
The following autofocus modes are available during live view
photography and movie live view:
To choose an autofocus mode, press the AF-mode button and
rotate the main command dial until the desired mode is
displayed in the monitor.
Mode Description
AF-S
Single-servo AF: For stationary subjects.
Focus locks when
shutter-release button is pressed halfway.
AF-F
Full-time servo AF: For moving subjects.
Camera focuses
continuously until shutter-release button is pressed.
Focus
locks when shutter-release button is pressed halfway.
AF-mode button Main command
dial
Monitor
Focus-mode selector
To Next Page
Loading...
