Nikon D800 - ISO Sensitivity; Adjusting ISO Sensitivity: The D800;D800 E; Adjusting ISO Sensitivity: The D4

19
Workfl ow
Before
Recording
Live View Menu Options Other Settings Recording
After
Recording
ISO Sensitivity
ISO Sensitivity
In movie live view, ISO sensitivity can be adjusted only in exposure mode h. Select exposure mode
h and start movie live view before adjusting ISO sensitivity as described below.
Auto ISO Sensitivity Control
Auto ISO sensitivity control is not available with movies.
Adjusting ISO Sensitivity: The D800/D800E
Adjusting ISO Sensitivity: The D800/D800E
Keeping the S button pressed, rotate
the main command dial until the de-
sired ISO sensitivity is displayed in the
monitor and control panel.
S button
Main command dial
Control panel
Monitor
Adjusting ISO Sensitivity: The D4
Adjusting ISO Sensitivity: The D4
Keeping the S button pressed, rotate
the main command dial until the de-
sired ISO sensitivity is displayed in the
monitor and control panels.
Main command dial
Top control panel
S button
Rear control panel
Monitor
■ ISO Sensitivity Range
The Movie settings > ISO sensitivity range option in the shooting menu for
the D4 is used to choose the range of ISO sensitivities available during movie
recording. Note that the camera may have trouble focusing and noise (ran-
domly-spaced bright pixels, fog, or lines) may increase at high ISO sensitivities:
a setting of 200 to 12800 is recommended in most circumstances.