Nikon D800E - Page 237

213
t
The camera can store data for up to nine non-CPU lenses. To enter
or edit data for a non-CPU lens:
1 Select Non-CPU lens
data in the setup
menu.
Press the G button to
display the menus.
Highlight Non-CPU lens
data in the setup menu and press 2.
2 Select a lens number.
Highlight Lens number and
press 4 or 2 to choose a lens
number between 1 and 9.
3 Enter the focal length and
aperture.
Highlight Focal length (mm)
or Maximum aperture and
press 4 or 2 to edit the
highlighted item.
Focal length can be selected from values
between 6 and 4,000 mm, maximum aperture from values
between f/1.2 and f/22.
G button