Need help?Do you have a question about the Nikon eclipse Ti-S and is the answer not in the manual?
General| Microscope Type | Inverted Microscope |
|---|---|
| Optical System | Nikon CFI60 optical system |
| Stage | Motorized or manual, various options available |
| Camera Compatibility | Compatible with various Nikon digital cameras and third-party cameras |
| Focusing | Coarse and fine focusing, motorized or manual |
| Nosepiece | Motorized or manual, typically 6-position |
| Imaging Modes | Brightfield, phase contrast, DIC, fluorescence |
| Eyepiece Tube | Binocular or Trinocular |
| Objective Turret | Motorized or manual |
| Compatibility | Nikon NIS-Elements software |
Details symbols used in the manual to indicate warnings and cautions for user safety.
Explains safety symbols found directly on the microscope product and their implications.
Details various Nikon microscope configurations, including Ti-U, Ti-U/B, Ti-S, and Ti-S/L100 models.
Describes the basic eyepiece base unit for visual observation with an attached eyepiece tube.
Details the eyepiece base unit with a camera port and optical path selector for microscopy cameras.
Explains the eyepiece base unit for external phase contrast microscopy featuring a turret for phase plates.
Details the simple and basic eyepiece tube for visual observation.
Describes the eyepiece tube with a manual shutter and Bertrand lens for objective pupil plane observation.
Explains the ergonomic eyepiece tube with adjustable binocular and Bertrand lens features.
Details the rectangular mechanical stage for X-Y specimen movement.
Describes the simple, fixed plain stage for easy specimen operation.
Explains the attachable mechanical stage for specimen holders.
Details the 100W dia pillar illuminator used with a separate lamphouse and condenser.
Explains the 30W dia pillar illuminator with a built-in lamphouse.
Provides an introduction to the principles and concepts of microscopy.
Details the setup for Sample Configuration 1, involving Ti-U, TI-DH Dia Pillar Illuminator 100W, System Condenser.
Details the setup for Sample Configuration 2, involving Ti-S, TI-DH Dia Pillar Illuminator 30W, ELWD-S Condenser.
Instructions for turning the dia illumination on and off for the microscope.
Details on how to adjust the brightness of the microscope illumination.
Explains how to select the optical path for image output on the microscope.
Guides on operating the microscope's condenser system for optimal imaging.
Instructions for operating the coarse and fine focus knobs for precise specimen viewing.
To Next Page