Need help?Do you have a question about the Nikon eclipse Ti-U/B and is the answer not in the manual?
General| Type | Inverted Microscope |
|---|---|
| Optical System | Nikon CFI60 optical system |
| Illumination | 12V 100W halogen lamp |
| Objective Lenses | CFI60 series objectives |
| Camera Compatibility | Compatible with various digital cameras |
| Focusing | Coarse/fine focusing knobs |
| Nosepiece | 6-position motorized nosepiece |
| Imaging Modes | Brightfield, Phase Contrast, DIC, Fluorescence |
| Camera Ports | Multiple camera ports available |
| Observation Tubes | Trinocular observation tubes available |
Explains symbols used for warnings and cautions in the manual.
Describes symbols found on the product indicating necessary precautions during use.
Covers warnings on intended use, disassembly, voltage, power cords, and heat from the light source.
Addresses lamp replacement, hazardous specimens, and flammable solvents.
Details cautions on power, liquids, electromagnetic waves, moving, assembly, stage, and disposal.
Covers care in handling, installation, storage, optical parts, and lamp handling.
Provides notes on using focus knobs and protecting product ports from light and dust.
Details the configuration of Ti-U, Ti-U/B, Ti-S, and Ti-S/L100 microscope bodies with various accessories.
Describes the components and operation of the microscope base unit, including ports.
Explains different types of eyepiece base units, eyepiece tubes, and their mounting.
Covers the different stages that can be attached, including mechanical and plain stages.
Details the two types of dia pillar illuminators: TI-DH 100W and TI-DS 30W.
Describes the TI-C Condenser Turret (System Condenser) and the ELWD-S Condenser.
Explains the TI-PS100W and TE-PS30W/TE-PSE30 Power Supplies, including their switches and connectors.
To Next Page