Need help?Do you have a question about the Nikon Eclipse TE300 and is the answer not in the manual?
General| Type | Inverted Microscope |
|---|---|
| Optical System | CFI60 Infinity Optical System |
| Illumination | 12V 100W halogen lamp |
| Objective Turret | 5-position or 6-position |
| Focusing Mechanism | Coaxial coarse and fine focus |
| Stage | Mechanical stage with X and Y movement |
| Eyepiece Tubes | Binocular and trinocular options |
| Eyepieces | 10x widefield eyepieces |
Explains warning symbols and covers general warnings for product use, voltage, and heat.
Outlines cautions for light sources, electrical safety, liquid contact, and microscope transport.
Provides essential notes on careful handling, installation, focusing, and lens care.
Identifies and illustrates the right-hand side components of the microscope system.
Identifies and illustrates the left-hand side components of the microscope system.
Illustrates and labels the rear components of the microscope system.
Guides on powering up the microscope, adjusting brightness, and setting the optical path.
Instructions for adjusting the condenser position and selecting objectives.
Covers adjusting eyepiece diopters, interpupillary distance, and specimen placement.
Details focusing the microscope and centering the condenser with different objectives.
Final steps for microscopy, including diaphragm adjustment and brightness control.
Guides on switching to phase contrast objectives and aligning annular diaphragms.
Details the procedure for centering the annular diaphragm for optimal phase contrast.
Covers final adjustments for phase contrast microscopy, including diaphragm and brightness.
Instructions for mounting SLR cameras or photomicrographic equipment.
Guides on turning on the camera and adjusting lamp brightness for photography.
Details selecting optical paths, filters, and composing the image frame.
Covers focusing, checking exposure time, and preventing external light.
Lists critical precautions for SLR cameras and photomicrographic equipment.
Details specific settings for using the Nikon F-90 camera.
Instructions for turning the power on/off and adjusting lamp brightness.
Explains switching optical paths and managing filters for different applications.
Guides on adjusting field and condenser aperture diaphragms for optimal image quality.
Details using the system condenser and handling objectives with correction rings.
Covers diopter, interpupillary distance, and focusing device adjustments.
Explains refocusing stopper use and operating the illumination pillar.
Covers operating the mechanical stage and preparing for photomicrography.
Guides on installing the microscope base, revolving nosepiece, and stage.
Instructions for installing the illumination unit and condenser holder.
Covers setting filters, mounting the eyepiece tube, and inserting eyepieces.
Details mounting various condensers and objectives.
Guides on installing the lamp and connecting power/control cables.
Instructions for installing cameras and photomicrographic equipment.
Lists optical symptoms, causes, and countermeasures for microscope problems.
Lists operational symptoms, causes, and countermeasures for microscope use.
Lists electrical symptoms, causes, and countermeasures for power-related problems.
Provides instructions for cleaning microscope lenses and painted surfaces.
Advises on proper storage and periodic checks to maintain performance.
Details the specifications and connections for the TE-PS30/TE-PSE30 power supply.
Instructions for mounting the 6V-30W illumination pillar.
Guides on mounting ELWD, SLWD, and HMC condensers.
Lists electrical specifications for the 12V 100W illumination pillar setup.
Lists electrical specifications for the 6V 30W illumination pillar setup.
Provides detailed specifications for the TE-PS100/TE-PSE100 power supply.
Provides detailed specifications for the TE-PS30/TE-PSE30 power supply.
To Next Page