48
Nikon
Film Scanner LS-4500AF User's Manual
ASCII commands
The LS-4500AF has a function which interprets and executes ASCII
commands. This function is not usually needed for application software.
However, if a problem occurs, we may ask you by telephone or fax to take
a simple troubleshooting measure by using this function to solve the
problem.
Do you have a “command execution” dialog in your applications? If so,
please try executing it.
Enter “EJ” from the keyboard and press the RETURN (ENTER) key; the
LS-4500AF will execute an eject operation. The ASCII commands
described in this manual are:
LCB: Causes the scanner to memorize the characteristics of
a lamp when a lamp is replaced.
BT1: Makes the flash memory program valid.
(BTO: Makes the EPROM program valid.)
9. Technical Tips on the LS-4500AF
To Next Page
Loading...
